Contract Sawmills, Breighton Airfield, Bubwith
£1,500,000
- For Sale

This prime business is situated on Breighton Airfield approximately six miles from the market town of Howden and access to the motorway network at J37 and approximately ten miles from the town of Selby and eighteen miles from the city of York. The site comprises a substantial modern industrial building with a comprehensive range of woodworking machinery, a recently constructed office block, concrete and hard core hardstanding and bare land, the whole extending to approximately 2.75 acres.

FULL DESCRIPTION

LOCATION
Situated approximately six miles from the market town of Howden and access to the motorway network at J37 and approximately ten miles from the town of Selby and eighteen miles from the city of York.

DESCRIPTION
The site comprises a substantial modern industrial building with a comprehensive range of woodworking machinery, a recently
constructed office block, concrete and hard core hardstanding and bare land, the whole extending to approximately 2.75 acres.

ACCOMMODATION
Description
An industrial site extending to approximately 2.75 acres and comprising;

OFFICE BLOCK

Constructed of red facing brick beneath a concrete interlocking tiled roof and having underfloor heating throughout.



Divided into;

GROUND FLOOR

• Entrance (14 ’10 ” x 3 ’10 ”)
(4.55m x 1.2m) plus
(3 ’8 ” x 4 ’6 ”)
(1.15m x 1.4m)
Concealed stairway to the first floor.

• Ladies & Gents Toilets

• Kitchen (11 ’ x 9 ’6 ”)
(3.35m x 2.9m)
Having a range of modern fitted units.

• Office One (17 ’ x 24 ’)
(5.2m x 7.35m) Less
(3 ’6 ” x 13 ’)
(1.05m x 4m)

• Office Two (15 ’8 ” x 14 ’6 ”)
(4.8m x 4.45m)

FIRST FLOOR

• Boardroom (17 ’ x 34 ’)
(5.2m x 10.5m)
Cupboard containing the water tank and access to the roof space.

• W.C

INDUSTRIAL BUILDINGS

• Industrial Building (85 ’ x 120 ’)
(25.9m x 36.57m) plus
(25 ’ x 32 ’)
(7.65m x 9.75m)
Steel framed building having a concrete floor throughout, insulated walls and roof and high pressure sodium lights. Three phase electricity supply.

• Lean – to (80 ’ x 15 ’)
(24.38m x 4.6m)
To the west elevation. Brick built building having a concrete floor throughout and an insulated roof and divided into; tool room, toilets, staff room, store and compressor room.

• Yard/Open Storage

The yard area is partly covered in concrete and partly hardcore.

• Bare Land

Situated to the south of the industrial building.




GENERAL INFORMATION

• The Business

Further information including turnover etc. is available upon request.

• Viewing

As agents for the Vendors of this site may we request that all viewing appointments are made strictly via our office.





• Tenure

It is understood that the tenure of the site is freehold. We have not inspected the deeds and have had to assume for the purpose of these particulars that the deeds do not contain any onerous or restrictive covenants, which would affect the sale of the property.

• Further Planning Requirements

Prospective purchasers are advised to contact the local authority to discuss any further planning requirements.

East Riding of Yorkshire Council
Development Control Division
County Hall
Beverley
East Yorkshire
HU17 9BA Tel: 01482 393891

• Wayleaves, Easements & Rights of Way

The site is sold subject to and with the benefit of all existing rights of way, water, light, drainage and all other easements affecting the land whether mentioned in these particulars or not together with all wayleaves for poles, stays, cables, pylons, water, gas and other pipes.

• Plans and Particulars

The plans and particulars and advertisements in connection with this sale have been prepared in good faith for the benefit of intending purchasers. Neither the vendor nor his Agent accept any liability for their accuracy whatsoever.

All plans are for identification purposes only, are not to scale and have been reproduced with the sanction of HMSO under licence No. ES780065. Crown copyright reserved.

• Services

Prospective purchasers can make the relevant enquiries from the following utility companies with regard to the services available.

Yorkshire Water Services (New Supplies & Enquiries), Broadacre House, Vicar Lane, Bradford, West Yorkshire, BD1 5RQ

Yorkshire Electricity – New Supplies, Supply Line (YorkshireElectric) PO Box 161, 161 Gelderd Road, Leeds, LS1 1QZ

British Gas (North Eastern) Vicarage Street North, Wakefield, West Yorkshire, WF1 4JU.

MACHINERY LIST
Machine Type/Model
Weinig Hydromat 23, 6 Head Moulder. 60 m/min. Outboard bearings, Straight & Profile Jointers, 50 mm spindles & 6000 r.p.m. 230 wide x 120 high. Heavy Duty Floor rollers to the infeed. Heavy Duty Floor rollers at the outfeed & outfeed collect station. Manual feed and stack. Sound & Safety enclosure. No. 4 Hydromat 23 6 Head Yr. 2003. 1st bottom Straight, Right & Left Straight & Stab, 1st top Straight, 2nd Top Stab, 2nd Bottom Stab jointers

Elevated In line Tandem Robinson 48" Bandresaws with Infeed Lift Tilt Hoist. Outfeed power rollers with side ejectors. 2 x 3000 mm sets of 5 cross chains. Integrated fairending rollers. Manual stack to Scissor Lift table to Heavy Duty Floor rollers to outfeed collect station. Timber Sound enclosure. Twin 48" Bandresaw Line

Single Stenner 36" VHM Bandresaw over pit with Heavy Duty Floor rollers at the infeed & outfeed. Manual feed and take off. Timber Sound enclosure Stenner 36" VHM Resaw

Weinig Hydromat 22AL 6 Head Moulder 60 m/min with Outboard bearings & jointers. 50 mm spindles, 6000 rpm. 230 wide x 120 high. Safety hoods and timber outer enclosure. Heavy Duty Floor rollers. Weinig E1 Infeed handling. Heavy Duty Floor rollers to the outfeed. No. 3 Hydromat 22AL 6 head moulder 1986 - 222-756 1st bottom, Right, Left, 1st top Straight jointers, 2nd top, 2nd bottom Profile jointers

Gau-jing Hydromat 7 Head Moulder 100 m/min with Heavy Duty Feed Rollers throughout. Outboard bearings & jointers. 50 mm spindles, 6000 rpm. 230 wide x 120 high. Safety hood. Heavy Duty Floor rollers. Cross chain infeed. Automatic cross feed stacker with lift table and rollers. Onto Heavy Duty Floor rollers. Into Strapper No. 2 Moulder Gau-jing Typhoon GA-623HCE Yr. 2013. 1st bottom straight, right & left straight & stab, 1st top straight, 2nd bottom none, 2nd top straight & stab, 3rd bottom straight & stab.

Weinig Hytdromat 23 , 7 Head Moulder 48 m/min Outboard bearings, Straight & profile jointers, 50 mm spindles & 6000 r.p.m. 230 wide x 120 hight. Safety Hood. Heavy Duty Floor rollers at the infeed and outfeed areas. No. 1 Moulder Hydromat 23 7 Head Yr. 1997. 1st bottom Straight, Right & Left Stab, 1st top Straight, 2nd bottom, None, 2nd Top Stab, 3rd Bottom Stab.

New Tilt Hoist destacker Yr. 2014. 4 arms to 6000 mm length

Rebuilt Bale Pak with saw dust seperator Wood shavings bale plant with carosell type saw dust seperator

3 off Cyclone type extractor systems
Machine Type/Model
Dimter S50 Automatic Cross Cut Saw with Optimising, 6.3 m infeed, 4.8 m outfeed Dimter S50 Cross Cut
Wadkin GA Adapted moulder for horizontal splitting Wadkin GA
Weinig H22 BL Multi head moulder Hydromat 22 moulder Yr 1981
Chisel mortiser Single head chisel mortiser
Wadkin Rip Saw Wadkin Rip Saw AGS
Wadkin Bursgreen Radial Arm Cross Cut Saw BRA Cross Cut
Interwood Pin Router Pin Router
Chop Saw Chop Saw
Chop Saw Chop Saw
De-Walt Radial Arm Cross Cut Saw De-Walt Cross Cut
Wilson FT Spindle moulder with Slide Table Wilson Spindle moulder
Power Feed Unit Power Feed
Wadkin MZF Narrow Bandsaw Wadkin MZF Narrow Bandsaw
2 off Air Compressors Thomas Wright Compressors
Wilson FQ spindle moulder Wilson FQ spindle
Profile sander LS-1NT ttLasIII model LS-1NT
Radio Frequency Flat bed Press RF Machinery Press
Mini Max Table Pad Sander Mini Max pad sander L55
2 off Bench Pillar Drills Bench Pillar Drills
Floor standing Pillar Drill Floor Pillar Drill
Single Bag Extractor Single Bag Extractor
Metabo Chop Saw with timber benches and stops Metabo Chop Saw
5 off H & M Services Heavy Duty floor rollers H & M Floor Rollers
Weinig OMA Tool Measuring Stand Weinig OMA setting stand
Cincinnati Tool Grinder Cincinnati tool & cutter grinder
Long Arm De-Walt Radial Arm Cross Cut Saw De-Walt Cross Cut
Dust Extraction Filter System connected to Waste Trailer at the small bottom workshop Aagaard I/S Dust Extraction AGF 2 Yr 1999
Tool Room Equipment
Wadkin Automatic Straight knife Grinder Wadkin NZ300 Auto Straight Knive Grinder
Wadkin Profile Grinder Wadkin NV300 Profile Grinder
Wadkin Tool Setting Stand Wadkin FDT tool setting stand
Ultrasonic tool cleaning tank Ultra Sonic cleaner
Wadkin NH tool grinder with Dividing head for on the block and bollinder grinding Wadkin NH Universal Tool Grinder
Various Band Resaw Blades Band Resaw Blades
Various Hydro Serrated Tool Cutter blocks 130 approx
Various Bollinders 16 sets
Various saw sleeves & blades
Various tool stands
Various Serrated Shaped cutter knives




































































































































SERVICES
• Services

Prospective purchasers can make the relevant enquiries from the following utility companies with regard to the services available.

Yorkshire Water Services (New Supplies & Enquiries), Broadacre House, Vicar Lane, Bradford, West Yorkshire, BD1 5RQ

Yorkshire Electricity – New Supplies, Supply Line (YorkshireElectric) PO Box 161, 161 Gelderd Road, Leeds, LS1 1QZ

British Gas (North Eastern) Vicarage Street North, Wakefield, West Yorkshire, WF1 4JU.

PLANNING
• Further Planning Requirements

Prospective purchasers are advised to contact the local authority to discuss any further planning requirements.

East Riding of Yorkshire Council
Development Control Division
County Hall
Beverley
East Yorkshire
HU17 9BA Tel: 01482 393891

VIEWING
Strictly by appointemt

Howden Office
01430 431201

Email:

Arrange a viewing of this property

If you're human, please click here
Submit
   * indicates a compulsory entry.